6 cute and creative DIY party decorations

Special occasions call for colour

That’s why Hallmark and Crayola created Colour Pop party supplies in lots of bold, bright colours. Choose the hue. Set the mood. Celebrate colourfully.

• Basic Kit: Get started with service for 12: dinner and dessert plates, napkins, cups and utensils (forks, spoons and knives).
• Premium Kit: Take your look to the next level with 12 napkins and 12 specially shaped plates with foil accents, 12 paper straws and 12 place cards.
• Decor Kit: Push your party over the top with a table runner, paper fans, oversized confetti and a customizable banner.

Celebrate a person, a feeling or an occasion on the centrepiece of all the best parties: the cake. We used Blue Colour Pop kits for our cake topper, but you can use whatever colours fit your theme.

What you’ll need to make a cake topper:

• 4 paper straws from 1 Premium Kit (we used Aqua)
• Banner flags, stickers and twine from 1 Decor Kit (again, we used Aqua)
• Tape or hot glue gun
• Scissors

First, decide what your banner will say. Depending on the size of your cake, you might try a name, a mood (like “aww” for a baby shower) or an all-purpose, celebratory “YAY,” like we did.

To hold up the banner, make two “pillars” out of straws—tape two together end-to-end for each side. (Pinch the end of one to insert it in the other.)

Use the stickers to add your word to the banner flags.

Cut a piece of twine long enough to hold your banner flags plus a few inches on either end and thread it through the holes in the flags.

Wrap one end a few times around the end of one straw pillar and secure it with tape or hot glue.

Repeat with the other end. (Don’t let your straws get grubby—you’re going to stick them in a cake!)

Poke the bottom end of each double-straw into opposite sides of the cake. Pro tip: Angle the straws out and put them in deep to keep the twine taut and the flags out of your frosting.

Whether you’re throwing a birthday party or a baby shower, the bright blue Colour Pop Decor Kit is spot on.

Nothing says summer like biting into ripe, juicy watermelon or tropical fruit. It just takes a little imagination to transform paper fans into larger-than-life fruit slices.

What you’ll need to make paper fan fruit slices:

• 3 paper fans from the Pink Decor Kit and 3 from the Warm Ombre Decor Kit
• Card stock in different fruity colours (we used dark green, lime green, orange, black and white)
• Scissors or craft knife and cutting board
• Plates, cans or cups in different sizes for tracing circles (or be fancy and use a compass)
• Pencil
• Hot glue gun or craft glue
• Black marker

Watermelon:

• Cut a green circle a little bigger than the medium-size red fan; cut out the centre to make a 1″ rind.
• Cut little watermelon seeds out of black card stock.
• Glue the rind and seeds to the fan.

Dragon fruit:

• Cut a white circle about an inch smaller than the large pink fan.
• Draw little seeds on the circle with the black marker.
• Centre the white circle on a pink fan and glue it down.

Kiwi:

• Cut a lime-green circle a little smaller than a small gold fan.
• Cut a white circle about half the size of the green one.
• Centre and glue the white circle on the green one.
• Cut teeny-tiny seeds from the black paper and glue them around the edge of the white circle. (You can also draw them on with the black marker.)
• Glue the inside of your kiwi to a small gold fan.

Grapefruit:

• Cut an orange circle a little bigger than the medium-size pink fan; cut out the centre to make a 3/4″ rind.
• Cut grapefruit seeds out of white card stock.
• Glue the rind and seeds to a pink fan. (Or make a blood orange with a red fan.)

Strawberries:

• Cut a stem or leaves from green card stock.
• Glue to the top of a small red fan.

Mixing and matching kits is the really fun part of Colour Pop. We love keeping a variety on hand to make pulling a party together easy any time.

Make a splash with paper confetti streamers. We used cool blues for our mermaid/pool/beach themed backdrop, but you can pull this look off with any mix of colours. Think about using school colours for graduation, matching nursery palettes or wedding colours for showers, making a rainbow for a Pride Parade after-party or using silver and gold for milestone anniversary parties.

What you’ll need to make a confetti streamer photo backdrop:

• Decor Kits: 1 each in Aqua and Cool Ombre
• White or silver curling ribbon (or dental floss or fishing line)
• Glue gun, craft glue or clear tape
• Poster or painter’s tape (for hanging)
• Optional: 3′-4′ dowel or curtain rod
• Optional background: Silver or iridescent streamer backdrop (or fringe curtain) OR shimmery wrapping paper, OR mix of shimmery ribbons in watery colours (blues, greens, silver, iridescent)

Make the banner.

First, decide what you want the banner to say. Some suggestions for a cool blue water-adjacent party:

• GO WITH THE FLOW
• MAKE WAVES
• COOLEST DAY EVER

Attach letter stickers to the banner flags in your Decor Kits (we love to mix and match).

Lay out the banner flags to figure out how many rows you want.

Cut a piece of twine for each row of flags—leave at least 6 inches on either side for hanging.

Thread the flags on the twine.

Pro tip: Your photo backdrop doesn’t have to go all the way up to the ceiling and down to the floor for it to feel like an immersive experience. Imagine a few average-height guests standing in front of it, and plan to take pictures from the waist up. Make your backdrop high enough that you can read the words on the banner and wide enough to hide the walls on both sides.

Make the confetti streamers.

Decide how tall and wide you want your backdrop to be. Cut the curling ribbon to that height plus a few inches for hanging, and cut enough pieces for one every 6″ or so across the whole width.

Lay the ribbon out on a flat surface the way it’s going to hang on the wall. (If you’re using a dowel or curtain rod, you can tie one end to that.)

Gather up the oversized confetti pieces from your Decor Kits and lay them out on the ribbons. Play around until you’ve got them spaced and placed the way you like, then glue or tape the confetti to the ribbon. Mix and match colours and sizes to look like bubbles, or alternate rows of different colours and sizes.

Put everything together.

Start with the background, if you have one: If it’s a streamer curtain or wrapping paper, just use the tape to attach it to the wall. If you’re using ribbon, cut it in a variety of lengths and tape the tops to the wall.

Next, layer on the confetti streamers, either by hanging the rod or taping the tops to the wall.

Then comes the banner—tape the ends of the twine to the wall.

Add the finishing touches by taping the fans to the wall on each side of the backdrop, as shown. (They’re handy for covering where you hung the banner.)

Backdrops aren’t just for DIY photo booths (gasp). Other ways to use them:

• Hang behind the gift or buffet table to create a focal point for the party.

• Decorate a front door.

• Put one behind a special chair for a visual spotlight on the bride, mother-to-be or other guest of honour.

Whether your guest list is filled with friends who go way back or best friends who just haven’t met each other yet, this is a fun and easy DIY that will get them talking (and laughing).

What you’ll need to make place cards:

• Place cards from the Pink Heart Premium Kit
• Pens/markers

Are your place cards folded? You’re halfway there.

Next, come up with your superlatives (Remember high school? “Most likely to…” “Best at…” and other compliments) or friends’ roles in the group. (The compliment part is very important.) Some tips:

• Think about your group of friends and what you love them for.
• Get out an old yearbook for inspiration.
• Go with the theme. For Galentine’s Day, they might be about love and friendship.

Here are a few of our favourites to get you started:

Superlatives

• Most Likely to Get Famous
• Most Stylish
• Most Likely to Run for President
• Class Clown
• Most Helpful

Group roles

• Loudest Laugh
• The Peacekeeper
• Group Mom
• Party-Starter
• Storyteller
• Cat Lady or Dog Mom

Write one on each card with a blank line underneath and put them at each seat (or on the serving table).

When guests arrive, invite them to take a seat or grab a card and add their name. (They can also get their bossy on and match friends with cards.)

Once everyone is together, ask each guest to share the card they picked and why.

From decorating to theme ideas, get more inspiration for a Galentine’s gathering right here.

Sometimes all the inspiration you need is fun shapes and colours. Arranging these hexagonal plates with a star in the centrr is perfect for crudités and dip, cheese and crackers, ice-cream add-ons, DIY bruschetta or cocktail garnishes. This teal and red combo feels right for a patriotic celebration or a superhero theme party.

What you’ll need to make this serving arrangement:

• Premium Kits: 1 Aqua Hexagon and 1 Red Star

So easy: Centre the star. Tuck the hexagons in the corner. If you want it to stay in place, double-stick-tape it to the runner.

That’s charcuterie in a cup. And it’s the perfect way to serve a delicious selection of meats, cheese and other yummies at a family picnic, grown-up happy hour or sticky kids’ party. Bonuses: You can make it ahead and they don’t have to share.

What you’ll need to make charcuperie:

• Cups from any Colour Pop Basic Kit
• Bamboo skewers

Snacks:

• Cheese cubes and olives or berries, grapes for skewering (also try dried fruit, cherry tomatoes, sliced or ribboned veggies)
• Long, thin crackers and/or bread sticks
• Cured meat, rolled in cones or tubes
• Nuts
• Pieces of fancy chocolate